Chimney Company in San Ramon - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 736-8208

Flat price quoted before we book

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in San Ramon, CA

Chimney repair in San Ramon usually means one of two things: a prefab metal chimney from the 1980s or 1990s that no longer meets clearance standards, or an open masonry fireplace showing water damage at the crown or flashing. The dry summers and intermittent burn bans shape how creosote forms here – slowly, in cool smoldering fires, often as glazed deposits that a standard brush won’t remove. Homes in Canyon Crest, Twin Creeks, and Dougherty Valley were built across a narrow window, and many still have their original factory chimneys. We stock manufacturer-specific poly brushes and camera gear to service those systems without disassembly. Call (833) 736-8208 when you need a repair-capable sweep, not just a brush.

Call (833) 736-8208

Why San Ramon Homes Are Different

San Ramon sits inside a high-fire-risk Wildland-Urban Interface zone, and since 2019 the municipal code has required annual chimney cleaning and inspection for any home within the Very High Fire Hazard Severity Zone. That makes a sweep here a code-compliance task as much as a maintenance one. Our technicians check spark arrestors, cap screening, and creosote levels as defensible-space precautions on every visit, because the oak-studded hills and Diablo winds make ember intrusion a real concern.

The housing stock compounds it. Most homes are 1970s through 2000s suburban detached houses in planned developments. The 1990s and 2000s Dougherty Valley build-out produced a steady run of prefab metal chimney systems that need manufacturer-specific cleaning methods, not traditional flue brushing. Many west-side and Dougherty Valley homes still have original 1980s-90s prefab fireplaces with short factory chimneys and tight clearances. Standard brushes don’t fit them. We keep poly brushes sized for those systems and run a camera before we recommend anything, because clearance problems in a prefab can’t be seen from the hearth.

The climate does the rest. Warm, dry summers mean wood burning is seasonal and intermittent. Fall and winter Spare the Air burn bans push homeowners into occasional, short fires. Those fires stay cool and smolder, which is exactly how glazed creosote forms. It’s harder to remove than flaky deposits, and it’s the kind that most often leads to a chimney fire if it’s ignored.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main San Ramon Services

San Ramon homeowners call us most often for two things: a code-required annual sweep with camera inspection, and dryer vent cleaning in homes where the exhaust run is long or hidden behind finished walls. Both are fire-risk services, and both deserve a technician who can repair what they find on the same visit.

Chimney Sweep in San Ramon

A sweep in San Ramon is a WUI safety inspection as much as a cleaning. We remove creosote and soot, then run a chimney camera to check the flue, cap, spark arrestor, and clearances. In Dougherty Valley prefab systems, we use manufacturer-specific poly brushes that won’t scratch the thin metal flue walls. If we find a problem – a cracked crown, failed flashing, a missing spark arrestor – we can quote the repair on the spot and often complete it the same day. Chimney Sweep in San Ramon

Chimney Sweep in San Ramon

Dryer Vent Cleaning in San Ramon

Lint builds up in the vent run, and in San Ramon homes with laundry rooms on the second floor or vents running long distances through walls, that buildup is harder to spot and easier to ignore. We clean the full run from the dryer connection to the exterior termination, check airflow, and replace damaged components with Famco venting parts where needed. It’s a dedicated service, not an add-on. Dryer Vent Cleaning in San Ramon

Dryer Vent Cleaning in San Ramon
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 736-8208

Chimney Repair in San Ramon

Chimney repair in San Ramon often starts with water. Warm, dry summers followed by occasional winter rain means crowns and flashing take a slow, steady beating without the freeze-thaw cycles other regions get. But the bigger issue is age and clearance. Many homes in Canyon Crest and Twin Creeks have original 1980s-2000s masonry crowns and caps that were built to older standards. In Dougherty Valley, we see prefab factory chimneys with failed panels, rusted chase tops, and clearances that don’t meet current code. The work is site-specific: sometimes it’s a cap replacement, sometimes a liner, sometimes both. We stock Gelco, Olympia Chimney, and Copperfield parts locally, and we repair what we find, not just what’s easy to reach. For more on how we approach full-system work, see Chimney Repair.

Chimney Cap Installation

Signs you need it

The cap is missing, rusted through, or no longer covers the full flue opening, leaving the chimney open to embers, rain, and birds.

What it costs in San Ramon

Typical cap installation in San Ramon runs $180 to $450 depending on the flue size and whether it’s a standard single-flue cap or a custom chase-top cover.

How we do it

We measure the flue and surrounding crown, select a Gelco or Copperfield cap sized for the existing chase, secure it with mechanical fasteners, and verify the spark-arrestor mesh meets WUI requirements.

Chimney Cap Replacement

Signs you need it

The existing cap has broken screening, corrosion, or a gap at the base that lets embers and rain slip through.

What it costs in San Ramon

A cap replacement in San Ramon typically runs $140 to $400 including removal of the old cap and disposal.

How we do it

We remove the old cap, inspect the exposed flue and crown, and install a new cap with screened sides and a solid lid sized to the existing termination.

Chimney Liner Installation

Signs you need it

The liner has cracked tiles, gaps in the mortar joints, or pitting visible on camera, or the home is being converted to a gas appliance that requires a different flue size.

What it costs in San Ramon

Full liner installation in San Ramon typically runs $2,200 to $5,800 depending on length, diameter, and whether it’s a flexible or rigid system.

How we do it

We camera the flue, size the liner to the appliance and chase dimensions, lower a professional-grade liner such as Olympia Chimney or DuraFlex into place, insulate where required, and reconnect the appliance.

Chimney Flashing Repair

Signs you need it

The ceiling or walls around the fireplace show water staining, or the existing flashing is lifting, cracked, or no longer sealed at the roofline.

What it costs in San Ramon

Flashing repair in San Ramon typically runs $350 to $1,200 depending on roof access, the number of flashing planes, and whether shingles or tiles have to be lifted.

How we do it

We inspect the full flashing plane, remove failed sealant, refit or replace the step and counter flashing, and seal with a high-temperature roofing adhesive matched to the existing roof material.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 736-8208

Chimney Crown Repair

Signs you need it

The concrete crown has visible cracks, spalling, or water pooling around the flue tile, or the interior shows water damage near the firebox.

What it costs in San Ramon

Crown repair in San Ramon typically runs $250 to $900 depending on whether it’s a resurfacing job or a full recast.

How we do it

We clean the existing crown, fill cracks with a flexible crown sealant, and where the crown is too far gone, we form and pour a new one with a proper slope and a drip edge.

What Chimney Repair Costs in San Ramon

Item Typical range in San Ramon
Chimney cap replacement $140 – $400
Chimney crown repair $250 – $900
Flashing repair $350 – $1,200

Does a cracked crown really matter in San Ramon’s mild climate?

Yes. Even without freeze-thaw, a cracked crown channels rain into the masonry and down the flue. That water eventually reaches the firebox and can delaminate a prefab panel or rust a steel liner. The repair is cheaper before the water stains show on the wall.

Will one visit tell me everything that’s wrong?

Yes. Every San Ramon chimney camera inspection includes the full flue, the smoke shelf, the cap, the crown, and the flashing. We repair what we find, and if the damage is outside our scope, we tell you exactly what to do next. Call (833) 736-8208 for an estimate.

Brands We Service in San Ramon

We install and service Gelco caps, Olympia Chimney liners, Copperfield chase covers, and Famco dryer vent components in San Ramon. These are the same professional-grade parts specified by certified chimney professionals nationwide, and we stock common sizes locally so repair quotes turn into same-day work more often than not. See our brands for details.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 736-8208

Pricing for Chimney Company in San Ramon, CA

Service Typical range in San Ramon
Chimney sweep with camera inspection $180 – $340
Chimney cap installation $180 – $450
Chimney cap replacement $140 – $400
Chimney liner installation $2,200 – $5,800
Chimney flashing repair $350 – $1,200
Chimney crown repair $250 – $900
Dryer vent cleaning $130 – $280

Prices climb in San Ramon when the chimney is a Dougherty Valley prefab with tight clearances that need manufacturer-specific brushes, or when a WUI inspection finds a missing spark arrestor that has to be replaced with a screened cap. Every estimate is set in writing before work begins, and the price on the estimate is the price you pay.

Neighborhoods We Serve in San Ramon

We work throughout San Ramon, from the older planned developments on the west side to the newer build-out in the east. Response time across the city runs fast dispatch from 7am to 7pm, Sunday through Friday, and we schedule around Spare the Air windows when fall burning bans affect cleanup timing.

  • Canyon Crest
  • Twin Creeks
  • Dougherty Valley
  • Gale Ranch
  • Inverness Park

Service Area – Cities Near San Ramon

We take calls from San Ramon and the neighboring Tri-Valley and East Bay communities, including Dublin, CA, Danville, CA, Castro Valley, CA, and Hayward, CA. If your home is in a WUI-adjacent neighborhood or you’ve just received a home inspection flag, call and we’ll tell you what’s involved.

Serving San Ramon, CA – Our Local Coverage Area

We serve San Ramon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in San Ramon

Ready to get started? Free estimates in San Ramon
Call (833) 736-8208

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Ramon Customers Say

★★★★★ 4.8 from 6+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Danielle Doyle

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Ramon Hernandez

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Nathan Thompson

How It Works in San Ramon

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in San Ramon. We'll get back to you fast. No obligation.

By submitting this form, you agree to our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7